GuangDao Power Booster & Super Oil Treatment

Guang Dao Power Booster & Super Oil Treatment
Guang Dao Power Booster & Super Oil Treatment   improved fuel economy by reducing port fuel injector deposits, intake valve deposits and combustion chamber deposits in 100% of the vehicles tested.
A vehicle demonstrates its best efficiency and engine performance when it is new. As the engine ages, its performance suffers from gasoline fuel-generated deposits that form on the fuel injector, intake valve and combustion chamber. Additives are required to control deposit formation.
Today's fuel, however, lack sufficient treatment of either enough additives or high quality additives. Fuel system deposits result in the following:
*Lost fuel economy *Lost power and poor throttle response *Failed emission test *Poor drivability- surging, hesitation, stalling, rough idle *Engine knocking (nging) and rap *Difficult starts
Treated Fuel Delivers Maximum Performance GDPBSOT is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. GDPBSOT help maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines. In engines with accumulated deposits, testing showed GDPBSOT provided the following clean-up benefits after only one tank of gasoline:
- Improves fuel mileage an average of 2.3% and up to 10.7%
- Reduces emissions
- Hydrocarbons (HC) up to 15%
- Carbon monoxide (CO) up to 26%
- Nitrous oxides (NOx) up to 17%
- Restored power and performance
- Reduced noise from carbon rap and pre-ignition
- Better drivability
- Smoother operation
Extends Engine Life Combustion temperatures reach 2000o/F burning off any oil that might reach the compression ring.Neutra provides a film of lubrication to the com pression ring, the upper cylinder, valve seats and guides...reducing wear and extending engine life.
Cleans Injectors Neutra's gentle solvent action keeps injector free from deposits, gum, and varnish thet cause inefficient operation.
   |
   |
|
Before Qmax Products |
After Qmax Products |
  |
  |
|
Before Qmax Products |
After Qmax Products | The Problem (carbon build-up)
  |
  |
- Causes pre-ignition and detonation
- Causes emissions to increase
- Harmful to the engine
|
- Causes loss of efficiency (Power loss)
- Higher running cost due to decrease in MPG and 
leads to costly repairs |
 
|